Top
Mon - Sat : 08:00 - 17:00
7171 yonge street Thornhill, Toronto, ON L3T 0C5

Swimming pools for a private home in Toronto

Swimming pools for a private home in Toronto

Home-style vacation is becoming more and more popular among metropolitan residents. And with the development of this area of pastime, naturally develops the theme of arrangement of own swimming pools. After all, on a hot summer day, what could be better than a refreshing bath in clean water? If we consider these points in terms of arrangement of the pool, it is easy to highlight the main characteristics that consumers imply when thinking about the swimming pools for a private home in Toronto.

So, the pool for the private house is:
  • Operation is mainly during warm seasons.
  • Relatively low cost.
  • Ability to equip the pool as cheaply as possible and with their own hands.

Let's see what options a person who decides to have his own pool can have.

Inflatable pools.

The easiest option to install. The principle by which an inflatable pool is installed is simple - the upper diameter is smaller than the lower one. At the expense of water pressure the pool expands and gets a stable form. Fully meets the above requirements swimming pools for a private home in Toronto, but has some disadvantages. Inflatable pools are not very reliable. In winter, they require removal and storage in a warm room. When stored in a rolled up frost, there is a high risk of cracks in the bending areas. Given the fact that any inflatable product - subject to punctures and damage, you can generally argue that this is a virtually one-time variant. Choose an inflatable pool makes sense only in small sizes, and at a low price, knowing that too long the pool will not serve.

Frame pools in Toronto

A more reliable version of the previous version. The principle of installation is completely different. A reliable metal frame is used, which has a long service life. But the material of the bowl itself is the same as in inflatable swimming pools - reinforced PVC. It automatically causes similar defects. The need to disassemble for winter and keep warm. Although it should be noted that, in general, the design of frame pools in Toronto is much more reliable than inflatable, and there are examples when such pools served up to seven seasons. With a relatively small budget, a frame pools in Toronto may be the best option for a summer house.

Metal frame pools in Toronto

The basis of the construction is a wall made of corrugated sheet metal. Pretty rigid construction. The pool is installed on a pre-prepared site with compacted sand. Inside the pool is put "cup bag" of PVC. The bottom of such pools do not have, only the walls. The entire structure is deprived of the disadvantages of frame and inflatable swimming pools - does not require disassembly for the winter (only conservation) and storage in warmth. However, has disadvantages of its own - a relatively high price and complexity of independent installation. A prefabricated metal frame pools in Toronto can serve as a very successful replacement for a stationary pool. The option for those who need a swimming pool at the cottage, the consumer qualities almost equal to the stationary for a relatively small amount of money.

Construction of the pool in Toronto

The most aesthetic, reliable, durable option will be to build your own pool at the cottage. This option is good for everyone, except for the expensive. construction of the pool in Toronto involves a lot of preparatory work, digging pits, monolithic and other works. There are many technologies available on the market today to construction of the pool in Toronto many of which significantly reduce the total cost of the project.

Summing up, we can safely say that a modern summer house owner who wants to have a pool at the cottage, will not be disadvantaged in the choice. The market offers many options from the cheapest to quite expensive. It remains only to determine your budget and pool at your cottage.